41 found, showing page 1 of 2
$64.99
2" LF FOOT VALVE
Low lead foot valve bronze body and poppet assembly. Furnished with Buna-A O-ring, stainless steel spring, and locknut. Working pressure of 200 psi (pound per square inch) female threads. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$19.99
10" ROUND VALVE BOX
The round valve box and snap-in cover are ejection molded structural foam polyolefin material that includes ultra violet stabilizers. The round body is tapered and the body has double wall construction at the top cover. Black body with green cover.
View Details
$131.99
*WATERBUG UTILITY PUMP
Wayne 1/6 H.P. (Horsepower) WWB WaterBUG submersible water removal pump with Multii-Flow Technology. Our Patent Pending Multi-Flo Technology is key and allows the user, easy selection of the appropriate discharge for the water removal application. The top discharge should be used to drain water from confined spaces; a window well, bath tub, laundry tub, even from 5 Gal. buckets. Side discharge should be selected for easy water removal from open areas; flat roofs, flooded basements, shower stalls or flooded yard. Our Patent Pending multi-ring suction strainer filters debris, keeping it clear from the suction intake which minimizes clogging. This powerful tool pumps up to 1257 GPH (Gallons Per Hour), connects to a standard garden hose and removes water down to a 1/16 In. of the surface, making the area virtually dry. 3/4 In. GH Adapter.
View Details
$200.99
1/4HP SENSOR UTILTY PUMP
The Wayne EEAUP250 1/4 HP (horsepower) water removal pump is ideal for crawl spaces, flat roofs, window wells, and other problem areas around the home where water accumulates. Its energy efficient oil-free motor pumps up to 3,000 GPH (gallons per hour) and removes water down to within 3/8" of the surface. Just plug it in and leave the pump unattended for worry-free water removal. The EEAUP250 senses the presence of water and only operates when needed, and its sealed thermoplastic construction is safe for submersible operation. Automatic On/Off electric water removal pump. iSwitch technology turns pump on and off by sensing the presence of water; removes water down to 3/8" of surface. Corrosion resistant, sealed thermoplastic construction. Fully submersible. 1/4 HP; max. flow rate is 3000 GPH; 1850 GPH at 10; of discharge lift. 1-1/4" discharge with 3/4" garden hose adapter. Can be left unattended to remove water from flooded basements, window wells, boats, stock tanks, flat roofs, low spots in driveways.
View Details
$227.99
3/4HP CAST/SS SUMP PUMP
Pumps up to 4600 GPH at 0'. Cast-iron submersible sump pump. Vertical float switch for automatic operation. Top suctiondesign filters debris and minimizes clogging. Designed for easy installation without any plumbing changes. Stainless steel, high performance 3/4 HP motor. 1-1/2" NPT discharge and durable cast-iron base. Easy carry handle for portability. Float guard protects switch from hang ups. 5 year warranty.
View Details
$309.99
1/2HP CAST SEWAGE PUMP
The Wayne WCS50T cast iron sewage pump is great for sewage basins, septic tanks and lift stations. Features a heavy-duty 1/2 hp (horsepower) motor and a tethered switch for automatic operation. The vortex impeller design reduces clogs and the rugged cast iron housing provides durability.
View Details
$139.99
1/3HP PLASTIC SUMP PUMP
Pumps up to 2500 GPH at 0'. Reinforced thermoplastic submersible sump pump. Piggyback tether float switch for automatic or manual operation. Top suction design filters debris and prevents clogging from debris in bottom of sump pit. Designed for easy installation without any plumbing changes. High performance 1/3 HP motor. 1-1/2" NPT discharge and reinforced thermoplastic base.
View Details
$379.99
1/2HP SHLW WELL JET PUMP
The ES jet pump is specifically designed for shallow well applications with suction lifts up to 25'. 1-1/4" suction and1" discharge. Ideal for homes, farms, cottages, and booster service. Each unit is capable of delivering enough pressurerequired for the efficient use of today's water-using appliances. Single-phase, 60 Hz, 3450 RPM, dual-voltage motor features Uni-Frame construction, copper windings, double-ball bearings, and overload protection with automatic restart. 2 year limited warranty.
View Details
$389.99
1/2HP CONV JET WELL PUMP
Dual voltage motors can be adapted for 115V or 230V current. Single-phase, 60 Hz motor. Includes pump, motor, and American made pressure switch. Convertible models come with flow control screw and flow control body. They do not include ejector. Motors equipped with overload protection. 2 year limited warranty.
View Details
$109.99
1/4HP SUBM UTILITY PUMP
The Wayne 1/4 H.P. (Horsepower) is a submersible portable utility pump designed to make water moving tasks easier. Typical applications include removing standing water, draining tanks, and aquariums, emptying clogged sinks and tubs, and boosting water pressure. Portable electric water removal pump lifts water over 25'; removes water down to 1/8" of surface. Corrosion resistant, sealed thermoplastic construction. Fully submersible. 1/4 HP; max. flow rate is 1050 GPH (gallons per hour); 860 GPH at 10' of discharge lift. 3/4" bronze garden hose adapter at discharge. For removing water where high lift is needed from flooded basements, boats and stock tanks. Assemble in the US with foreign and domestic parts.
View Details
$259.99
30GAL VERTICAL WELL TANK
Factory pre-charge: 38 psi (pounds per square inch). Maximum working pressure 100 psi. Maximum operating temperature 200 F (degree Fahrenheit). Engineered to provide years of trouble-free service using cold rolled steel for a higher strength to weight ratio. Rugged, stable steel base with protective plastic strip. Heavy-duty butyl rubber diaphragm and durable polyolefin liner to prevent corrosion. Waterworker tanks feature an appliance quality finish which is resistant to sunlight and harsh conditions. All tanks are completely lead free for safety. Meets NSF (National Sanitation Foundation) Standard 61 for clean, safe drinking water. 5 year warranty. Blue tank.
View Details
$149.99
*1/2HP PLASTIC SUMP PUMP********
Submersible Sump Pump with vertical switch. Cast aluminum body resist heat with built in thermal overload protection. Fits in a 12" Sump Basin. 1 1/2" NPT discharge. 9' double sealed cord. 1 year limited warranty.
View Details
$149.99
*1/3HP PLASTIC SUMP PUMP
1/3 HP (horsepower) submersible sump pump. Cast aluminum body resists corrosion, stress, and heat. Built-in thermal overload protection. 1-1/2 NPT (National Pipe Thread) discharge with a 9' double sealed cord. 1 year limited warranty. Pumps 2780 GPH (gallons per hour) at a 5' lift, 2190 GPH at a 10' lift.
View Details
$218.00
SEWAGE PUMP
Cast-iron submersible sewage pump. Pumps up to 5700 GPH at 0'. Piggy-back tether float switch for automatic or manual operation. 2" discharge capable of handling 2" solids. Designed for easy installation without any plumbing changes. Easy carry ring for portability. Lower ball bearings for quiet operation.
View Details
$469.99
3/4HP CONV JET WELL PUMP
Dual voltage motors can be adapted for 115V or 230V current. Single-phase, 60 Hz motor. Includes pump, motor, and American made pressure switch. Convertible models come with flow control screw and flow control body. They do not include ejector. Motors equipped with overload protection. 2 year limited warranty.
View Details
$5.69
3" GRATE ATRIUM BLACK
Flat top structural foam polyethylene atrium grate with UV inhibitor. Open surface area is 9.5 sq. in. Fits 3" sewer and drain pipe, fittings, and 3" corrugated pipe.
View Details
$69.99
1/6HP SUMP UTILITY PUMP
1/6 HP portable utility pump, molded pump housing will not rust or corrode, pumps up to 16 GPM capacity. Removes water to within 1/8" of surface. Fully submersible, completely portable, weighs 8 lbs. Overload protected motor. Adapts to standard garden hose. 3/4" NPT outlet allows for plastic pipe installation. Dimensions: 7-3/4" H. x 6-1/4" W. 1 year limited warranty. Air cooled motor. Fits into 7" opening.
View Details
$139.99
*3/10PLASTIC SUMP PUMP
Submersible Sump Pump with vertical switch. Cast aluminum body resist heat with built in thermal overload protection. Fits in a 12" Sump Basin. 1 1/2" NPT discharge. 9' double sealed cord. 1 year limited warranty.
View Details
$119.99
1/4HP PLASTIC SUMP PUMP
1/4 HP (horsepower) submersible sump pump. Cast aluminum body resists corrosion, stress, and heat. Built-in thermal overload protection. 1-1/2" NPT (National Pipe Thread) discharge with a 9' double sealed cord. 1 year limited warranty. Pumps 2200 GPH (gallons per hour) at a 5' lift, 1620 GPH at a 10' lift.
View Details
$269.99
4/10 SEWAGE PUMP
1/3 HP Cast Iron Sewage Pump with thermal overload to protect against overheating. Standard tethered switch provides for automatic operation. Epoxy-coated, cast iron design dissipates motor heat to ensure long pump life. Bottom suction inlet with a vortex impeller. 2 In. discharge with a 2 In. solids-pumping capacity. Ceramic and carbon seal for reliable service and extended life. Temperature rating 130 degrees. Waterproof cord with grounded plug. Weight: 21 Lb. 1 year limited warranty.
View Details
$569.99
*1/2HP WELL PUMP SYSTEM
Complete systems include: 1/2 HP (horsepower) shallow well pump with1-1/4" suction and 3/4" discharge, 15 gal (gallon) equivalent diaphragm tank, 20-40 psi (pounds per square inch) pressure switch. Dual voltage motor is factory connected for 115V (volts). Spade connectors enable quick voltage charge to 230V service. 2 year limited warranty.
View Details
$449.99
3/4HP SHLW WELL JET PUMP
The ES jet pump is specifically designed for shallow well applications with suction lifts up to 25'. 1-1/4" suction and1" discharge. Ideal for homes, farms, cottages, and booster service. Each unit is capable of delivering enough pressurerequired for the efficient use of today's water-using appliances. Single-phase, 60 Hz, 3450 RPM, dual-voltage motor features Uni-Frame construction, copper windings, double-ball bearings, and overload protection with automatic restart. 2 year limited warranty.
View Details
$699.99
1HP 3W/230V WELL PUMP
4" diameter stainless steel pump, motor shell, and drive shaft. Quiet and economical operation. Submersible pumps are rated on the average number of gallons delivered per minute to the well head from various water level depths. Models rated at 10 GPM are for the average residential size home and family. Manufactured by Flint & Walling, all Star pumps use the contractor recognized water lubricated Franklin motor. Cast-iron discharge, lightening protection. Easy heat-shrink splice kits included in package along with illustrated installation instructions. 1-1/4" cast-iron discharge. 1 year limited warranty.
View Details
$34.99
BOX VALVE 14x19 REC
Referred to as 14 X 19 by National Diversified, the actual size of the structural foam polyethylene valve box and cover with locking latch is 12 In. x 17 In. Features an overlapping lip cover, and ultra violet inhibitor. The body is tapered - the bottom is larger to keep it from pushing up once buried. Black body with green cover.
View Details
$7.99
7" ROUND VALVE BOX
The round valve box and snap-in cover are ejection molded structural foam polyolefin material that includes ultra violet stabilizers. The round body is tapered and the body has double wall construction at the top cover. Black body with green cover.
View Details
$21.49
*GRATE BASIN 9X9 BLK
For use with 9" square catch basin. Color: Black.
View Details
$8.99
*GRATE ATRIUM 4" GRN
Fits 4" sewer and drain pipe and fittings, and 4" corrugated pipe.
View Details
$4.59
*GRATE ROUND 4" BLK
Fits 4 In. sewer and drain pipe and fittings and 4 In. corrugated pipe.
View Details
$544.99
0CONV JET WELL PUMP 1HP
Dual voltage motors can be adapted for 115 V. or 230 V. current. Single-phase, 60 Hz motor. Includes pump, motor, and American made pressure switch. Convertible models come with flow control screw and flow control body. They do not include ejector. Motors equipped with overload protection. 2 year limited warranty.
View Details
$39.99
30-50PSI PRESSURE SWITCH
Features low water cut-off switch to shut off pump at 12 P.S.I. to prevent overheating damage to submersible well pumps. Recommended for submersible pumps. Compatible with jet pumps, submersible pumps, and reciprocating pumps. The standardaction contacts open on rising pressure. Diaphragm actuated - 1/4" 18 NSF internal threads.
View Details
$329.99
1/2HP SHLW WELL JET PUMP
The Wayne 1/2 HP (horsepower) 420 GPH (gallons per hour) shallow well jet pump is designed for wells up to 25' deep with jet pumps housed in rugged cast iron housing. The pump can run at 115V or 230V with the quick change voltage selectionswitch. The pressure switch is set to 30 psi (pounds per square inch) On and 50 psi Off for high-pressure delivery. 3/4" NPT (National Pipe Thread) discharge with 1-1/4" suction. Dual voltage 120V/240V) high efficiency square flange motor (factory set for 240V). Pressure switch is pre-set at 30-50 psi for automatic operation. Durable cast iron volute with dedicated priming port for volute filling. For wells 0' - 25' in depth. 1/2 HP; max. flow rate is 420 GPH; 50 psi).
View Details
$109.99
1/3HP SUBM UTILITY PUMP
Portable electric water removal pump, pumps dirty water with small (1/2") solids; removes water down to 3/8" of surface. Corrosion resistant, sealed thermoplastic construction. Fully submersible. 1/5 HP; max. flow rate is 1700 GPH (gallons per hour); 780 GPH at 10' of discharge lift. 1-1/4" discharge with 3/4" garden hose adapter. For removing water from flooded basements, boats, low-lying outdoor collection spots.
View Details
$193.99
1/2HP CAST SUMP PUMP
2-pole switch...positive On/Off action. Disconnecting 115V conductors prevent lightening damage. Float...automatically starts and stops pump. Operates vertically to save space. Automatic overload...prevents damage to motor windings. Compact...operates in sump pits as small as 10" in diameter. Ball bearing...never needs oiling, permanently lubricated. Cord set. Waterproof 3-prong grounding type, 8' in length. Watertight shaft seal...liquid lubricated, ceramic seal, prevents water from entering motor housing. Oil encased for quiet, cool operation, and permanent lubrication. Pump is warranted for 3 years. 1-1/2" discharge.
View Details
$84.99
1/6HP SUBM UTILITY PUMP
Portable electric water removal pump. High flow rate, oil-free pump removes water down to 3/8" of surface. Corrosion resistant, sealed thermoplastic construction. Fully submersible. 1/6 HP (horsepower); max. flow rate is 3000 GPH (gallons per hour); 1850 GPH at 10' of discharge lift. 1-1/4" discharge with 3/4" garden hose adapter. For removing water from flooded basements, boats, low-lying outdoor collection spots.
View Details
$159.99
1/3HP CAST SUB SUMP PUMP
1/3 HP submersible sump pump with rugged cast-iron motor housing with high efficient, oil filled motor for enhanced heat dissipation. Thermal overload protection keeps the motor from overheating. Premium vertical switch for automatic operation. Fits into a 10" diameter pit. 1-1/2" discharge with a nonclogging vortex impeller. Pumps 2280 GPH at a 5' lift. 2 year limited warranty.
View Details
$79.99
1/4HP UTILITY PUMP
1/4 HP portable utility pump. Molded pump housing will not rust or corrode. Pumps up to 27 GPM capacity. Fully submersible, completely portable, weighs 6 lb. 115V thermal overload protected motor. 3/4" male discharge with garden hose adapter for easy hook up. Pumps floor dry to 3/8". Fits into 7" opening.
View Details
$129.99
*GARDN HOSE TRANSFER PUMP
Transfers water where you need it. Use in your home to empty water beds, washing machines or remove water from pool covers. Use on the farm to empty stock tanks or transfer water. Use for industry to empty flat roofs or truck docks. Moves up to 360 gallon per hour. Includes 2 extra impellers, 2 gaskets and one 6' hose with strainer. Complete instructions included.
View Details
$39.99
40-60PSI PRESSURE SWITCH
Designed for the control of electrically driven water pumps. Compatible with jet pumps, submersible pumps, and reciprocating pumps. Diaphragm actuated, 2 poles, 1/4" - 18 NPSF (internal thread).
View Details
$42.99
3/4" LD FREE CHECK VALVE
Silicon bronze valve body and poppet assembly. Furnished with buna-n O-ring, stainless steel spring, stainless steel washer, and stainless steel locknut. Check valves have a working pressure of 400 P.S.I. FPT. x FPT. Code approved in California.
View Details
